This bundle includes the myCistern Control Unit as well as the original myCistern refill device.

myCistern – The upgrade for rainwater use!

Intelligent, well thought-out, autonomous and reliable – myCistern takes your cistern to the next level. Our control unit shows that sustainable water use and comfort are not mutually exclusive, but rather complement each other better than ever before.

Never stand in the rain again - with the innovative level measurement from myCistern

Say goodbye to empty cisterns and annoying manual checking! Thanks to myCistern, you can always keep an eye on the water level in your system - precisely, smartly and via app.

It's that easy:

1. Install the sensor in the cistern in just a few steps.
2. Connect to the control unit and calibrate.
3. Install the app on your smartphone or tablet.

You can see the current fill level of your cistern in real time and myCistern automatically optimizes the range of your rainwater!

Filter monitoring – A unique must-have

Our unique and specially developed myCistern filter monitoring makes it easier for you to maintain your cistern filter. You are automatically notified when the filter needs cleaning - there is no need for an accidental manual check of the dirt filter.

Fully automatic, demand-based irrigation with weather data

Let our smart irrigation system do the work for you – it works completely autonomously and according to your needs.

Only myCistern combines the control of a cistern with automatic and intelligent irrigation. In contrast to a tap water connection, the amount of water within a cistern is limited. This becomes more and more of a problem in times of increasing drought when it comes to the range of collected rainwater. Solve it with our Control Unit, whose data-driven optimization models ensure particularly efficient irrigation. We use a wide range of data, including the current cistern fill level, past and future rainfall and temperatures, to get the most out of your cistern for you.

Sounds complicated? But it's not, thanks to our intuitive and user-friendly app. See for yourself!

All-round control in your hand with myCistern

Fill level, dirt filter, irrigation, fountains... We want to make the automation of your cistern as uncomplicated as possible. We can do this thanks to our app, which, despite its wide range of functions, focuses on user-friendliness and operability. With just a few taps, the entire system can be configured and tailored to your needs. You keep track of everything - worldwide.

dry-run protection and smart refilling

The myCistern Control Unit reliably protects your cistern pumps from dangerous dry running and thus from damage. If necessary, the system automatically replenishes water from an alternative source to ensure continuous operation. To use the refill system, the separately available refill device or refill device Pro as well as a drinking water supply line or an approved well are required.

Original myCistern refill device – The perfect addition for long-term reliability

The refill device fits seamlessly into the myCistern ecosystem. It is connected to the water supply line and refills the cistern with water when needed.

Easy commissioning

The refill device is directly compatible with the myCistern Control Unit. The bracket is attached to the wall and the included 5-meter-long cable is plugged into one of the four switching outputs on the Control Unit. The refill device can then be configured in our app.

No level switch required thanks to innovative level measurement

Our refill device is controlled by the control unit and therefore does not require a level switch . The minimum fill level that should be maintained using the refill device is set directly via our app and can be varied in 5% increments.

Give your cistern the ultimate water management upgrade – with myCistern for next-level rain management!

In order to achieve maximum flexibility, we have opted for 230 V AC, i.e. the same voltage as a household socket, as the voltage for the switched outputs. For experienced irrigation technicians, this may seem a little strange at first glance, considering that the outputs are also intended to switch solenoid valves. Although there are numerous 230 V solenoid valves, unfortunately it is not the standard. The crucial point here is the " also " - it is not just solenoid valves that are intended to be switched. Although there are certain components such as the extraction pump in most cisterns, every system is basically different. One user may operate a time-controlled ornamental fountain, another may want to water in 3 zones, and yet another does not fill their cistern using a controlled solenoid valve, but switches on their well pump to refill.

You can already see that packing all these diverse requirements into a control system is no easy task. And if you then go an additional step and set the goal that as many people as possible should be able to operate the control system without any great technical knowledge, then it becomes even more difficult.

The result of all these high demands may be right in front of you - the myCistern Control Unit. A true all-in-one tool for the rainwater use of tomorrow - intuitive, uncomplicated and reliable. The four freely assignable household sockets create the necessary flexibility that our customers want and at the same time ensure maximum simplicity when connecting. And so that the connection of the solenoid valves works perfectly, you can find them pre-assembled with a household plug in our shop at mycistern.com .

If the product is available for immediate delivery, it will be shipped to you within two working days and delivered by our shipping service provider DHL.